CCBFF - MIL-P-24441, F151 BASE

  • MSDS: CCBFF
  • Manufacturer: INTERNATIONAL PAINT CO INC
  • Product Name: MIL-P-24441, F151 BASE
  • National Stock Number: 8010-00-410-8458
Product Identification

Product ID:MIL-P-24441, F151 BASE
MSDS Date:03/11/1991
FSC:8010
NIIN:00-410-8458
MSDS Number: CCBFF

Responsible Party
INTERNATIONAL PAINT CO INC
2270 MORRIS AVE
UNION, NJ 07083-0386
US

Emergency Phone: 713-682-1711

Info Phone: 713-682-1711

Cage: 26351

Contractor
INTERNATIONAL PAINT INC
HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

Ingredients

BUTYL ALCOHOL; (N-BUTYL ALCOHOL) (SARA 313) (CERCLA) VP

CAS: 68410-23-1

RTECS: EO1400000

Fraction By Weight: 20-25%

OSHA PEL N/K

ACGIH TLV: N/K

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITANT. MAY CAUSE
VISION IMPAIRMENT EVEN BLINDNESS. CORROSIVE. CAUSES IRREVERSIBLE
EYE DAMAGE. SKIN: IRRITATING. MAY RESULT IN DERMATITIS. MAY CAUSE
SENSITIZATION OR OTHER ALLERGIC RESP ONSES. INHALATION: IRRITATION
OF RESPIRATORY TRACT, HEADACHE AND DIZZINESS AND UNCONSCIOUSNESS.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INGESTION: GASTROINTESTINAL
IRRITATION, NAUSEA, VOMITING, DIARRHEA. CHRONIC OVEREXPOSURE TO AND
MISUSE OF SOLVENTS HAS BEEN LINKED TO PERMANENT BRAIN AND NERVOUS
SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid

First Aid:EYES: FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
AT LEAST 15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN:
REMOVE CONTAMINATED CLOTHING, WASH SKIN WITH PLENTY OF SOAP AND
WATER. LAUNDE R CLOTHES BEFORE REUSE. INHAL: REMOVE TO FRESH AIR.
GIVE ARTIFICIAL RESPIRATION IF NEEDED. GET MEDICAL ATTENTION.
INGESTION: CALL MD IMMEDIATELY TO DETERMINE WHETHER OR NOT TO
INDUCE VOMITING.

Fire Fighting

Flash Point Method:SCC
Flash Point:99.0F,37.2C
Lower Limits:1.4%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
SMOTHER FLAMES W/ONE OF EXTING MEDIA. WATER MAY BE USED TO COOL
UNOPENED CNTNRS, BUT MUST NOT BE USED (SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT. CLOSED CONTAINERS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN BUILDING DESIGNED AND
PROTECTED FOR STORAGE OF LIQUIDS WITH NFPA CLASS GIVEN BY OSHA,
CLASS IC.
Other Precautions:AVOID BREATHING DUST OR CHIPS FROM SANDING OR
BLASTING SURFACES COATED WITH THIS PRODUCT. RECOMMEND GROUNDING AND
BONDING OF CONTAINERS WHEN TRANSFERRING LIQUIDS AND POWDERS TO
AVOID STATIC CHARGE BUI LD UP.

Exposure Controls

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE PARTICLES OF
OVERESPRAY DURING SPRAY APPLICATION. IN RESTRICTED VENT AREAS, USE
NIOSH APPRVD RESP I/A /W 29 CFR 1910.134 TO REMOVE (SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT IN VOL & PATTERN TO KEEP TLV & LEL
OF HAZ INGREDS BELOW SPECIFIED LIMITS & TO REMOVE (SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (SUPDAT)
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
WEAR APPROPRIATE IMPERVIOUS PROTECTIVE CLOTHING TO PREVENT SKIN
CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: AS EXTING MEDIA. TAKE CARE TO PVNT SPREAD OF BURNING
LIQ W/WATER. CLSD CNTNRS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
RESP PROT: COMBINATION OF PARTICULATES & VAPORS. VENT: DECOMP P
RODS DURING WELDING OR FLAME CUTTING ONSURFS COATED W/THIS PROD.
EYE PROT: & FULL LENGTH FACESHIELD .

Chemical Properties

Boiling Pt:B.P. Text:244F,118C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.282
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:35 WT

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBON FRAGMENTS, NITROGEN COMPOUNDS.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.